Plan B

International One Metre Racing Yacht

SHOWCASING - PLAN B - A HIGH PERFORMANCE IOM RACING YACHT FOR COMPETITIVE RC SAILING

RADIO CONTROLLED INTERNATIONAL ONE METRE RACING YACHT

Peter Burford, designer and Builder

AUSTRALIA

pLAN b PRICES

 

The yacht can be supplied at various levels of completion.

Please choose your requirement from the following list.

Prices listed are in AUD, Australian currency.

______________________________

 

YACHT READY FOR RIGS AND RADIO CONTROL

Hull painted in one colour of your choice, two-pack paint with clear two-pack top coat paint.  Foils and ballast in white, acrylic paint.  All hull fittings mounted.  Hales ball-raced deck blocks.  RMG 290 EF winch with 32 mm. self-tensioning drum.  RMG  deck mounted switch.  Waterproof Hitec HS-646WP rudder servo with rudder push-rod and tiller connected.  Wired with XT 60 plugs and 1300 mAh Lipo battery. The winch will need adjustment and to have sheet lines added when installing your radio and rigs.

$2,900.00

______________________________

 

AS ABOVE

But without winch, switch, rudder servo, wiring and battery.

$2,200.00

______________________________

ALTERNATIVE COLOUR SCHEMES

The hull can be painted with more than one colour, or with metallic or pearlescent effect.

Additional charge per colour and per effect.

$80.00

______________________________ 

RIGS, WITHOUT SAILS

11 mm. diameter, black or silver, high-tensile aluminium masts.

Sailsetc, black or silver rectangular booms.  

The rigs are fully assembled with commercial and bespoke fittings, stays and attachments, ready to mount on the boat. A final adjustment will be needed.

B and C rigs have corrector weights inside the masts, bringing them to a nominal A rig weight.

A rig, $380.00

B rig, $370.00

C rig, $350.00

______________________________

 

SAILS

A   MAIN, made from 50 micron translucent or transparent film.  

$95.00

A   JIB, made from 50 micron translucent or transparent film.

$85.00

B   MAIN, made from 75 micron translucent film.

$90.00

B   JIB, made from 50 micron translucent or transparent film.

$80.00

C   MAIN, made from 75 micron translucent film.

$80.00

C   JIB, made from 75 micron translucent film.

$70.00

______________________________

MAIN sails have the IOM class insignia applied.

______________________________

SAIL NUMBERS STENCILLED

Clearly and neatly marked in black permanent ink using one-time stencils.

Per sail, $15.00

______________________________

COUNTRY DESIGNATION STENCILLED

Clearly and neatly marked in black permanent ink using one-time stencils.

Per sail, $15.00

______________________________

Sails are supplied with the luff wires inserted, interleaved with brown paper and rolled within 90 mm. diameter cardboard tubes.

______________________________

SAILS FITTED TO PlanB RIGS

Fitting charge per rig, $60.00

 

When fitted, sails and rigs are supplied mounted within a premium, Bill Clancy wooden rig and sail box, at an extra charge. 

Rig and sail box, $300.00

______________________________

 

PLAN B YACHT READY TO RACE

$5,000.00

This is a comprehensive, premium package, with all that is required to race the yacht, assembled, adjusted, measured and certified. The price is slightly more than the sum of the components, to reflect this extensive preparation.

Yacht built to the above specifications.  Hull in painted in one colour with foils painted in white.  All deck fittings, sheet lines and rigging installed and adjusted.  Two rigs, ‘A’ and ‘B’ with numbered ‘A’ and ‘B’ sails suits fitted and adjusted to the rigs and the yacht.   FrSKY Taranis Qx 7/FrSKY X6R Mode 2 radio control fitted and adjusted.  Winch, switch, servo and all electrics fitted and adjusted.  Quanam E4 ecube 35 W 3.0 Amp AC battery charger and 1300 mAh Li-po battery with safety charge bag.  Trent Jarratt inclinable wooden boat stand. Bill Clancy wooden rig box. Yacht and sails measured and registered, certificate supplied.

boat stand.jpg

______________________________

 

SPARES

 

Keel with ballast

$350.00

Rudder with shaft

$100.00

Winch cover without cutouts

$3.00

main-sheet post

$20.00

Silicone bow bumper

$20.00

Central, moulded plastics hatch cover

$7.00

Rear hatch, woven polyester sticky-back patch

$3.00

Plan B stern name sticker

$3.00

Bill Clancy plywood rig and sail box.  Fitted interior and finished exterior with handle and catches.

$300.00

Trent Jarratt wooden tilting boat stand.  Stained timber with stainless steel fittings.

$200.00

Digital scale for measuring jib boom lift tension.

$5.00

scale.jpg

______________________________

 

Prices are as delivered to Emerald Lakes, Carrara, Queensland, Australia.

Packaging and freight to other destinations will be at extra charge.

Please contact me for an estimated delivery date and a total price of your selection. Plan B is a a single person, cottage industry and delivery times can be lengthy.

No deposit is required. Goods will be invoiced and payment will be due prior to delivery or shipment.

You can pay by Direct Bank Deposit or by PayPal, at no additional charge.

 

PETER BURFORD

448 PETSCH CREEK ROAD

TALLEBUDGERA VALLEY

QUEENSLAND 4228

AUSTRALIA

info@peterburford.com.au

______________________________

 

 

 

 

 

 

 

A PERFORMANCE IOM DESIGNED AND BUILT IN AUSTRALIA BY PETER BURFORD
"Everyone needs a Plan B"